Posted in

Can you transport a scissor lift in a truck?

As a scissor lift supplier, I get this question at least 3 times a week from folks who need to move their lift between job sites: “Can you transport a scissor lift in a truck?” The short answer is: yeah, most of the time—but it’s not just slamming it in the back of your work truck and driving off. There’s a ton of stuff to get right to keep your lift (and everyone else on the road) safe. Let me break it down like I would with a customer standing at my shop counter. Scissor Lift

First, let’s start with the basics: not all scissor lifts are made the same. The tiny, electric, self-propelled lifts that max out at 19 feet high? Those are totally truck-transportable, no problem. I had a customer last month who runs a small painting crew—he had a 19-ft electric scissor, and he tied it right down in the bed of his half-ton pickup with heavy-duty straps, and it worked like a charm. But if you’ve got a bigger, diesel-powered lift that goes 40+ feet high? That’s a different story. A 40-ft scissor lift weighs anywhere from 5,000 to 8,000 pounds, and it’s wider than a standard pickup bed—you can’t just toss that in the back of a regular truck.

Wait, let’s clarify what “truck” means here too. I’m not talking about a tiny Ford Ranger with a 6-ft bed. I’m talking about a full-size work truck, or even a flatbed truck, because that’s what most people end up using for lifts. Flatbeds are actually the best for transporting scissor lifts, because they give you open space to tie things down, no weird truck bed walls getting in the way. But even with a flatbed, you need to make sure the lift fits. Measure twice, move once, right? I always tell customers to measure two things: the length of the scissor lift’s base (the part that sits on the truck bed) and the width. A 26-ft scissor is usually around 5 feet wide, so a standard 8-ft flatbed will fit that easily. But a 40-ft scissor might be 6 feet wide, so you’ll need a wider flatbed, or maybe a trailer—wait, did I say truck? A lot of people mix up trucks and trailers, but a trailer is different. If someone asks, “can you transport it in a truck,” we’re talking about a vehicle with its own cab and bed, not a separate towed trailer. But even so, some trucks are too small. That’s the first mistake I see: people grabbing their half-ton pickup because they think “truck” = big enough, and then the scissor lift hangs over the back end. That’s not just unsafe—it’s illegal in most states. Overhang rules vary, but generally, you can’t have more than 3 feet of load over the rear bumper without a flag at night, and that’s for small stuff. A scissor lift’s overhang is way more than that, so you have to make sure the entire base is on the truck’s bed.

Next, weight. Oh man, weight is a huge one. A half-ton pickup (the kind people call “light duty”) has a maximum payload of around 3,000 pounds. A 26-ft scissor lift is already 3,500 pounds. That means you’re over the payload limit before you even add straps, ramps, or whatever else you’re bringing. That’s a recipe for bent suspension, blown tires, or even a truck that can’t stop fast. I had a customer last year who tried to move a 26-ft scissor in his half-ton, and halfway to the job site, his rear suspension dropped so low the bumper was dragging on the pavement. He had to call a tow truck to get it to my shop, and he ended up having to rent a three-quarter-ton truck just to move it. Three-quarter-ton and one-ton trucks have payloads up to 6,000 pounds, which is enough for most small to mid-sized scissor lifts. But for anything over 30 feet, you’re probably going to need a flatbed truck with a higher payload, or a truck with a gooseneck setup, which is way more stable for heavy loads.

Then there’s securing the lift. This is where so many people cut corners, and that’s how you end up with a scissor lift sliding off the truck at 60 mph. I always tell customers: use at least four heavy-duty ratchet straps, not the cheap nylon ones you get at the dollar store. The straps should be rated for at least twice the weight of the scissor lift. So if your lift is 4,000 pounds, get straps that are 8,000 pounds minimum. You need to tie the straps to the lift’s anchor points, not to the base frame’s random holes. Most scissor lifts have specific tie-down points built for transport—use those, otherwise you could crack the frame or have the strap pull through. Also, never tie the straps to the scissor arms; those are designed to move up and down, not hold the whole weight of the lift. One last tip: when you tighten the straps, pull them tight enough that you can only move the lift a half-inch side to side or front to back. Any more than that, and it’s going to shift on the highway.

Wait, also—do you have to fold the scissor lift? Yeah, 100%. You can’t transport a scissor lift with its arms extended all the way up. That’s not just a bad idea for weight distribution; it’s way too tall. If you’re driving under a bridge or a power line, you’ll hit it, no question. Even if you’re on back roads, a fully extended scissor lift is like a sail catching the wind, and it can tip the truck over. So always fold the arms all the way down, lock them in place, check that the lift’s platform is lowered completely, and make sure the hydraulic system is off before you drive. I always tell customers to do a walkaround before they leave the shop: check the tires for air, check the straps again, make sure nothing is sticking out, and turn off the key. Easy steps, but so many skip them.

Now, what about exceptions? Like, if you have a really tiny scissor lift, the kind that folds up and fits in the bed of a midsize pickup? That’s super common for home improvement contractors or small electricians. I had a customer who does holiday light installation—he has a 15-ft scissor that’s only 1,200 pounds, so he just drops it in the bed of his Tacoma, ties it down, and goes. That’s totally fine, but you still have to secure it, right? Even a small lift can slide and damage your truck or hit another car.

Wait, let’s talk about the mistakes I see all the time. One guy tried to transport a 30-ft scissor in a regular pickup, and he didn’t measure the length. The base was 8 feet long, and his truck bed was only 6 feet. So the whole lift stuck out 2 feet over the cab. That’s not just unsafe—wind caught it, and the lift shifted forward, almost breaking his windshield. Another guy used rope instead of straps. Rope stretches, so by the time he got to his job site, the scissor lift was loose, and it banged up the side of his truck. Don’t do that.

Now, as a supplier, I also want to give you a real tip: when you’re looking for a scissor lift, think about how you’re going to move it. If you only have a small pickup, don’t buy a 40-ft lift. If you have a flatbed, great, but make sure it’s rated for the weight. A lot of my customers come to me and say, “I want a 30-ft lift, but I only have a half-ton truck,” and I have to be honest with them—they need to either upgrade their truck, rent a transport service for big moves, or go with a smaller lift. I never pressure anyone, but it’s my job to tell them the truth, because I don’t want them getting into an accident.

Wait, what about legal stuff? Like, if you transport a scissor lift, do you need any special permits? Most of the time, if the lift is within the legal width and length limits, you don’t need a permit. But if it’s wider than 8 feet, or longer than 50 feet, you might need a permit from the state DOT. And if you’re moving it across state lines, that’s another thing—each state has different rules. I always tell customers to check their local DOT website before they move a big scissor lift, because getting a ticket for an oversized load is not cheap. Like, a $500 ticket for not having the right flags or lights, and that’s the best case.

Another thing: weather. If you’re transporting a scissor lift in rain or snow, make sure the tires have traction, and if you’re going on a long trip, maybe use a tarp to keep water out of the electrical components. Wait, but don’t cover the tie-down points, obviously. I had a customer who covered his scissor lift entirely with a tarp, and when he got to his job site, he had to rip the tarp off to access the tie-downs, and then he realized water had gotten into the battery. That’s a hassle you don’t need.

Let me sum this up, because I know it’s a lot. Can you transport a scissor lift in a truck? Yes, if:

  1. It’s a lift that fits on your truck’s bed (length, width, weight—check the payload rating of your truck!)
  2. You fold the scissor arms all the way down, lock them, and turn off the hydraulics
  3. You use heavy-duty straps rated for twice the lift’s weight, tied to the lift’s built-in anchor points
  4. You check for legal requirements and permits if it’s an oversized load
  5. You do a walkaround before driving to make sure everything is secure

Now, if you’re not sure if your truck can handle a specific scissor lift, or you need help figuring out the right transport setup, hit me up. I’ve been selling scissor lifts for 8 years, and I’ve helped hundreds of customers get their lifts where they need to go safely. Whether you’re a small crew with a pickup or a big contractor with a fleet, I can walk you through what you need. Don’t guess—ask someone who knows.

Three Mast Aluminum Lift References:

  1. Occupational Safety and Health Administration (OSHA). 2022. “Mobile Elevated Work Platform (MEWP) Safety Guidelines for Transport.”
  2. National Highway Traffic Safety Administration (NHTSA). 2021. “Light-Duty Truck Payload and Load Securement Standards.”
  3. American National Standards Institute (ANSI). 2020. “Scissor Lift Design and Transport Safety Requirements.”
  4. State Department of Transportation (DOT) Oversized Load Guidelines, 2023. (U.S. General Summary)

Shandong Faster Machinery Co., Ltd.
Shandong Faster Machinery Co., Ltd. is one of the most reliable scissor lift manufacturers and suppliers in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please rest assured to buy advanced scissor lift made in China here from our factory.
Address: No.76-4, Hainan Island Road, Qingdao, China.
E-mail: sales@fasterlift.com
WebSite: https://www.fasterlift.com/