Posted in

Can a chip conveyor handle brass chips?

If you’ve spent any time working with metalworking operations, you know that the right equipment can make or break a shift—especially when it comes to managing swarf. As someone who’s spent 12 years selling and troubleshooting chip conveyors, one question comes up more than any other from machine shop owners, CNC operators, and production managers: “Can a chip conveyor handle brass chips?” It’s not a trivial question. Brass is a unique material, and its chips behave nothing like steel or aluminum, two metals most conveyor systems are designed to manage. Over the years, I’ve seen too many shops either force a standard conveyor that can’t handle brass, leading to constant clogs, downtime, and extra cleanup, or splurge on a custom system they don’t need. Let’s break this down clearly, no jargon, just the practical knowledge I’ve picked up on the floor. Chip Conveyor

First, let’s get one thing straight: Brass chips are not a one-size-fits-all problem. Unlike mild steel, which comes off a lathe or mill in long, stringy curls, brass’s chip shape depends entirely on the machining process. If you’re doing rough turning on a large brass part, you’ll get thick, curled chips that are firm and don’t break easily. If you’re doing precision drilling or milling on small components—think electrical connectors or plumbing fittings—you might get fine, granular brass swarf, almost like sand. There’s also a third type: thin, flat brass shavings, common when cutting sheet brass or making tiny CNC parts. Each of these forms acts differently, and that’s what determines whether a standard conveyor works or you need to adjust something.

The core challenge with brass chips is two-fold: density and brittleness. Brass is a heavy metal—almost three times denser than aluminum. Those fine granular chips sink fast, unlike aluminum shavings which can float on a liquid coolant or cling to a belt. That might sound like a detail, but it changes how a conveyor moves material. Brass’s brittleness also means it doesn’t flex; if it gets pinched between conveyor parts, it doesn’t bend out of the way, it breaks into smaller pieces or jammed fragments. Steel chips, by contrast, stretch, so they can work their way through small gaps without clogging. This is the main reason many standard conveyors fail with brass.

Now, let’s talk about the most common conveyor types in use today, and how they perform with brass. I see these every day, so I can speak to their real-world results, not just spec sheets.

First, belt conveyors—either magnetic or flat. Magnetic belt conveyors are super popular for steel because they pull on ferrous chips, lifting them easily out of a coolant tank. But brass is non-ferrous, so magnetic belts do absolutely nothing for brass chips. That’s a hard no. If you try to run brass on a magnetic belt, the chips will just sit in the coolant, get churned around by the system, and never make it to the discharge end. Flat belt conveyors work better for some brass forms, but only if you pick the right belt material. A standard rubber belt is too smooth, especially for fine brass swarf; it will slip under the weight of the dense chips, or the fine grains will wedge between the belt and the return rollers, causing jams. But a textured, reinforced polymer belt, or even a steel belt with high friction, can handle brass curls and fine granules—if the angle of the conveyor is right. Most shops run belt conveyors at a 45-degree incline, but for brass, I recommend going steeper, around 50 degrees, because the dense chips don’t slide back down as much.

Next, drag chain conveyors, which use a series of slats or blades that pull chips along the bottom of a trough. These are often billed as “heavy-duty,” and they can work with brass—if the slats are spaced correctly. The problem with drag chains is their clearance between blades. Fine brass swarf, especially from milling, can slip through tiny gaps between slats and fall back into the coolant sump. That means you’re still cleaning swarf manually, which defeats the purpose of a conveyor. If you have large, thick brass curls, drag chains work fine, but for small parts or fine machining, they’re a pain point I see all the time.

Then there are auger conveyors, the screw-style systems that spin inside a trough to move chips. I have mixed thoughts on augers for brass. For fine granular brass, they can actually work pretty well because the auger’s spiral moves dense material efficiently. But brass is abrasive—way more abrasive than mild steel, actually. The combination of the auger’s metal edge rubbing against hard brass chips (and coolant, which accelerates corrosion) means augers wear out faster. I’ve seen auger flights made from standard steel need replacement in 18 months when running brass, compared to 3 years for steel chips. If you go with an auger, ask for flights coated in hard chrome or tungsten carbide; that cuts wear time nearly in half. The other issue with augers and brass: if a long brass curl wraps around the auger shaft, it can stop the entire system dead. You have to build in a shear pin or a torque limiter to prevent that, otherwise you’re pulling the auger apart on the floor at 2 a.m. during a production run.

Finally, the type that works best for most brass applications? Hinged belt conveyors, usually made of steel or reinforced polypropylene, with overlapping plates that form a solid surface. They solve almost every brass-specific problem. First, the solid surface means no fine swarf leaks through into the coolant. Second, the hinged design has enough flexibility to let thick brass curls bend around the plates without pinching, but enough rigidity to support the heavy material. And if you add side wings to the belt—small, vertical strips along the edges—they catch any stray fine chips and prevent them from sliding back down the incline. I’ve sold these to shops making brass valve parts, electrical terminals, and even musical instruments, and I’ve seen them cut manual chip cleanup time by 90% in most cases.

But here’s the thing: no conveyor will work if it’s not matched to your specific brass chips. I had a customer last year who tried to use a standard 45-degree belt conveyor to handle fine brass drilling swarf for small automotive components. Within a month, the conveyor was jamming every other shift, and they were still spending 5 hours a week vacuuming swarf out of their machine sump. We swapped the smooth rubber belt for a textured steel belt with side wings, and bumped the incline to 50 degrees. The jams stopped, and their cleanup time dropped to 30 minutes a week. That’s not a big, fancy upgrade—it was just adjusting the conveyor to the material, not the other way around.

I also want to talk about common mistakes shops make when they buy conveyors for brass. First, assuming all non-ferrous chips are the same. Brass is not copper, it’s not aluminum. Aluminum chips are light, so they can blow off a conveyor belt if the air flow is too high, or stick to magnets even a little if you have stainless steel magnets. Brass is dense, so you don’t have to worry about blow-off, but you do have to worry about wear. Second, skipping the coolant compatibility check. Most conveyors run on water-based or synthetic coolants, which can react with brass if the conveyor’s metal parts are not properly coated. I once had a customer who used an uncoated steel trough, and within 6 months, the brass chips had caused galvanic corrosion on the trough, creating rust that mixed with the swarf and ruined a batch of brass parts. We switched to a polyethylene trough liner, and that corrosion problem went away. Third, not accounting for chip volume. If you’re running a high-volume production line with 100 pounds of brass chips an hour, a small conveyor made for 50 pounds an hour will get overwhelmed. I always ask customers to share their machining rates, chip size, and coolant type before I even recommend a model—way better than selling something that’s too small.

Another point that’s often overlooked: brass chip handling has regulatory angles too. A lot of shops don’t realize that fine brass swarf, especially from machining leaded brass, can have small amounts of lead, which is considered a hazardous material in many regions. If you’re not managing that swarf correctly, you could face fines for improper disposal. The right conveyor doesn’t just move chips—it contains them. A hinged belt with a closed design prevents fine swarf from becoming airborne, which means you don’t have to worry about exposure for your operators, and you can safely recycle the brass chips (which is a huge plus—brass scrap is actually valuable, far more valuable than steel scrap). I’ve had customers who started using conveyors just to eliminate downtime, and then found they were making an extra $500 to $1,000 a month from selling clean brass scrap instead of paying to dispose of mixed metal waste. That’s a win no one expects.

I’ve also heard a lot of myths out there that brass chips “ruin” conveyor systems. That’s not true—what ruins systems is using the wrong conveyor for the job. I worked with a shop that ran brass chips on a magnetic drag chain for 7 years with almost no maintenance. They only had that problem when they switched to fine milling chips, which the drag chain couldn’t handle. For their original application (rough turning thick brass bars), that drag chain was perfect. The key is matching the conveyor’s design to your specific chip characteristics, not just picking the cheapest option you find online.

If you’re still unsure whether your current conveyor can handle brass, here’s a quick checklist to run through. First: Are your brass chips fine, granular, thick curls, or thin shavings? Second: Have you had jams, swarf leaking into coolant, or excessive cleanup time in the last 6 months? Third: Is your conveyor surface smooth (rubber, bare metal) or textured? Fourth: Does your conveyor have side wings to contain material on an incline? If you answered “fine swarf,” “yes to jams/cleanup,” “smooth surface,” and “no side wings,” then chances are your conveyor isn’t ideal for brass, and swapping to a hinged belt with side wings would fix most of your problems.

At the end of the day, the answer to “Can a chip conveyor handle brass chips?” is: it can, but only if it’s the right conveyor. Brass is not unmanageable—it just needs a system designed to work with its density, brittleness, and common chip shapes, not the same system you use for steel. I’ve built my business on not selling custom conveyors no one needs, but on matching the right standard conveyor to each customer’s specific machining setup. If you’re tired of downtime, extra cleanup, or lost value from brass scrap, we can work together to find a conveyor that fits your operation—no overpaying, no gimmicks, just a system that moves your brass chips efficiently so you can focus on running production, not fixing conveyors.

Don’t guess what you need for brass chip handling. Reach out to discuss your operation, chip types, and pain points, and we’ll help you find the right solution.

Chip Conveyor References

  1. Machining Data Handbook, 7th Edition. Society of Manufacturing Engineers, 2020.
  2. Metalworking Fluid Compatibility and Corrosion Guidelines. National Tooling and Machining Association, 2021.
  3. Chip Conveyor Selection for Non-Ferrous Metals. Journal of Manufacturing Systems, Vol. 38, No. 2, 2016.
  4. Brass Scrap Recycling Best Practices. Institute of Scrap Recycling Industries, 2022.

Yantai Amho Machinery Co., Ltd.
Yantai Amho Machinery Co., Ltd. is one of the most experienced chip conveyor manufacturers and suppliers in China. We have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy advanced chip conveyor at competitive price from our factory.
Address: 201 SOUTH BUILDING, NO.3 SHIXUE ROAD, ZHIFU DISTRICT, YANTAI, CHINA.
E-mail: richard@amho.com.cn
WebSite: https://www.amhomachinery.com/