If you’re following the small modular nuclear reactor (SMR) space, you know it’s not just about shrinking traditional nuclear plants—they’re a new, modular breed designed to sit on footprints smaller than a high school football field, deliver anywhere from 10 MWe to 300 MWe, and cut construction timelines from a decade to 3-7 years. As a supplier specializing in precision parts for both nuclear power and fusion equipment, I’ve spent the last eight years working with engineers at reactor developers on everything from Idaho to Norway, and I can tell you: SMRs only deliver on their promise of safety, scalability, and cost-effectiveness if every core component works exactly as intended, no exceptions. Too many newcomers to the space fixate on the reactor vessel as the star of the show, but I’ve seen projects derailed by a flimsy coolant loop or a poorly engineered containment system—so let’s break down the essential parts that actually make an SMR function, and why they matter for the people building them. Nuclear Power and Nuclear Fusion Equipment Parts

First, the Reactor Vessel and Core Assemblies: The Smaller, Smarter Heart of SMRs
Let’s start where the nuclear reaction happens: the reactor vessel and its core. Unlike large traditional reactors, which have cores holding hundreds of fuel assemblies, most SMR cores are compact, often built as a single, factory-fabricated unit that can be dropped into the vessel like a big, custom-built appliance. Wait, I said “most”—some developers, like NuScale, actually use a modular core split into smaller sub-assemblies to ease transport, but every SMR’s core has two non-negotiable parts: the fuel assembly and the control rod drive mechanisms (CRDMs).
Fuel assemblies for SMRs are different from legacy reactor fuel. Most SMRs use high-assay low-enriched uranium (HALEU), which has a higher uranium-235 content than the 3-5% used in traditional reactors—around 5-20% enriched. That’s not just a random tweak: a higher enrichment lets the core run longer, with some SMRs only needing refueling every 10-20 years, which is a huge win for remote communities or grid operators that hate frequent outages. But HALEU comes with its own set of engineering challenges, especially when it’s packed into smaller fuel pins. Our team’s been working with several developers on fuel pin cladding that can handle higher temperatures and radiation damage—old zircaloy cladding just doesn’t hold up to HALEU’s intensity, so we’ve partnered on a new steel-based alloy that’s 30% more resistant to corrosion. That’s the kind of specific, parts-focused work that separates a theoretical SMR design from one that can actually operate.
Then there are the CRDMs, the parts that control how much power the reactor makes. Control rods are made of neutron-absorbing materials like boron or hafnium, and they slide into the core to slow or stop the fission reaction. For SMRs, CRDMs have to be even more precise than their large-reactor counterparts—since the core is smaller, even a 1-millimeter misalignment can throw off power distribution and increase wear on the core. We supply precision-machined hafnium control rod blades and spring-loaded CRDM drive shafts for three different SMR developers, and I’ve seen firsthand how a single out-of-tolerance rod can cause a unit to fail pre-operation testing. That’s why these parts can’t be mass-produced off the shelf; they need custom machining, rigorous testing, and traceability from raw material to final assembly.
Next, the Primary Coolant System: The Unsung Workhorse That Keeps SMRs Safe and Efficient
If the reactor core is the heart, the primary coolant system is the circulatory system—without it, the core overheats in seconds. SMRs use two main types of coolant: light water (just regular H2O) for so-called “light-water SMRs” like NuScale’s design, and liquid metals (sodium or lead-bismuth) or molten salt for “advanced SMRs” like TerraPower’s Natrium reactor or molten salt designs from Oklo. Each comes with its own set of part requirements, and this is where a lot of engineering teams cut corners—only to regret it later.
Take light-water SMRs first. Their primary coolant loop is a closed system, meaning the water never touches the environment. It flows through the core, absorbs heat, and then goes to a steam generator, where it turns water into steam to spin a turbine. The key parts here are the reactor coolant pumps and the steam generator tubes. For SMRs, these pumps are smaller than large-reactor pumps, but they have to operate at higher pressure and temperature because the compact core generates more heat per unit volume. We’ve had clients ask us to use off-the-shelf automotive pumps for their SMR prototypes, and every time, we push back—automotive pumps aren’t designed for continuous operation in a high-radiation, high-temperature environment. Our custom stainless steel coolant pumps have reinforced impellers that can handle 500°F water for 60+ years, which is non-negotiable for SMRs’ 80-year design life.
For advanced SMRs with liquid metal or molten salt coolants, the challenge is even bigger. Molten salt, for example, is highly corrosive at operating temperatures around 1,200°F, so the pipes and heat exchangers that carry it can’t be made of standard steel. We work with a specialty alloy manufacturer on high-purity, corrosion-resistant steel pipes for these systems, and we also supply the valves that regulate coolant flow—valves that have to seal perfectly to prevent leaks, even when the system is hot and under pressure. One molten salt SMR developer almost had a test fail because a valve seal wore out after 100 hours of operation; we redesigned the seal using a self-lubricating ceramic composite, and since then, their test runs have gone 1,000+ hours without a leak. That’s the part of the job most people don’t talk about, but it’s what makes or breaks a new SMR’s safety record.
Then there’s the Containment and Passive Safety Systems: The Line of Defense That Makes SMRs Stand Out
One of the biggest selling points of SMRs is their safety, and most of that comes from passive safety systems—parts that don’t need electricity or human intervention to work, unlike the active pumps and valves used in traditional reactors. But passive safety doesn’t mean no safety parts; it just means the parts are designed to work on their own if something goes wrong. The most critical part here is the containment structure, and for many SMRs, it’s different from the steel-reinforced concrete domes used in large plants.
Most small SMRs are designed with underground or below-grade containment vessels, which are smaller, cheaper to build, and offer better protection against external threats like tornadoes or aircraft crashes. We supply the steel liners for these containment vessels—liners that have to be perfectly welded to prevent radioactive material from escaping if there’s a coolant leak. For SMRs using light water, there’s also a core catcher: a stainless steel structure under the core that would catch molten fuel if a meltdown ever occurred. Unlike large reactors, which use concrete core catchers, SMRs’ compact size lets them use smaller steel core catchers, but those need to be able to withstand 2,800°F molten fuel and high pressure for 72 hours, the standard regulatory requirement for reactor cooling after a shutdown. We test every core catcher we supply to make sure it can hold that temperature for 96 hours, just to be over-prepared—because when it comes to nuclear safety, over-prepared is the right way to be.
Another key passive safety part is the pressurizer, for light-water SMRs. The pressurizer maintains the coolant loop at a constant pressure, preventing the water from boiling too early. For large reactors, pressurizers are big, cylindrical steel tanks, but SMRs use smaller, modular pressurizers that integrate directly into the primary coolant loop. These small pressurizers have to be highly sensitive to pressure changes—even a 1% shift can cause a leak or a power outage. We use precision pressure sensors and welded bellows in our pressurizer designs, which are more reliable than bolted connections, and they withstand radiation better, too.
Next, the Power Conversion and Balance of Plant (BOP) Systems: The Bridge Between Nuclear Heat and Grid Power
All the reactor core and coolant work is for nothing if you can’t turn the heat into electricity to send to the grid. The power conversion system and balance of plant (BOP) parts are what make that happen, and for SMRs, they’re designed to be modular so developers can transport them easily, not just the reactor itself.
For most SMRs, the power conversion system is a steam turbine or a small gas turbine (for advanced SMRs using molten salt or liquid metal). The key parts here are the turbine blades and the generator windings. Because SMRs are smaller, their turbines are more compact, which means the blades spin faster to generate the same amount of power—around 3,600 RPM for a 100 MWe SMR, compared to 1,800 RPM for a large reactor turbine. Faster spin means more wear, so turbine blades have to be made from high-strength, heat-resistant nickel alloys. We work with a machining shop that specializes in these alloys, and our turbine blades are precision-balanced to within 0.1 ounce, which prevents vibration that can damage the turbine over time.
The BOP parts include everything from the pumps that cool the turbine to the transformers that step up the voltage for the grid. A lot of developers overlook BOP parts, but they make up 20-30% of an SMR’s total cost, so getting them right is key to hitting that target cost of $60/MWh or lower that developers are promising. For example, we supply small, modular transformers that are built to fit on a single flatbed trailer, which saves on transport costs that would otherwise eat into profit margins. One of our clients, a remote mining company in Alaska, chose our BOP parts because they could ship the entire power package on one truck, instead of needing special heavy hauling equipment that costs 3x more. That’s the kind of practical, parts-focused solution that turns a theoretical SMR into a deployable project.
Then there’s the Instrumentation and Control (I&C) System: The Brain That Keeps Everything Running
You can’t operate an SMR without a reliable I&C system—the computers and sensors that monitor temperature, pressure, and power levels, and adjust the control rods and coolant flow accordingly. For SMRs, I&C systems have to be smaller than those used in large reactors, but they also have to be more autonomous, because many SMRs are designed to operate with minimal on-site staff (some only need a single operator for daily checks).
The key I&C parts here are the radiation sensors and the digital control modules. Radiation sensors have to be sensitive enough to detect a tiny change in neutron levels in the core, but they also have to be immune to radiation damage themselves—something traditional sensors aren’t built for. We supply silicon carbide-based radiation sensors, which are 10x more resistant to radiation than silicon sensors, so they can operate for the full 80-year design life of the SMR without needing replacement. The control modules, meanwhile, have to be certified for nuclear use, meaning they can’t fail even in a power outage. We use redundant, hardwired control modules instead of software-based systems, because software can have bugs that cause shutdowns—we’ve seen that happen to a small prototype reactor a few years back, and it delayed testing for six months. That’s why hardwired, redundant I&C parts are non-negotiable for SMRs, even if they cost a bit more upfront.
Now, let’s talk about what I’ve learned in eight years in this industry: a lot of people outside the nuclear space think SMRs are just “nuclear plants for small places,” but the engineering is way more complex than big reactors. Every part has to be built to exacting standards, with traceable materials, and tested in conditions that simulate 60 years of operation, not just a few weeks. As someone who supplies parts for both nuclear and fusion equipment, I can tell you that the precision needed for SMRs is similar to fusion, but the regulatory bar is even higher—nuclear parts have to meet strict NRC (or equivalent international) standards, while fusion parts are still evolving.
I’ve also seen first-hand the pitfalls of cutting corners on parts. A few years ago, we lost a contract to a developer who chose a cheaper, off-the-shelf control rod from a non-specialized supplier. Two months later, they called us in a panic because the rod was corroding after just three months of testing. We supplied a custom, corrosion-resistant rod, but they missed their regulatory deadline and lost $2 million in grant money. That’s the kind of mistake that comes from treating SMR parts like commodity items, instead of critical, safety-related components.
If you’re a reactor developer, a utility planning to deploy SMRs in the next five years, or a partner looking to build out the supply chain, the key parts we’ve talked about—core assemblies, coolant systems, containment structures, power conversion, and I&C—are the foundation of a successful SMR. No matter how good your design is, if any of these parts fail, the whole project falls apart.
We specialize in custom, precision-engineered parts for SMRs that meet the highest international safety and quality standards, with full traceability from raw material to final assembly. Our team of engineers works directly with clients to design parts that fit their specific SMR design, whether it’s a light-water, molten salt, or liquid metal reactor. We also partner with regulators to make sure all our parts meet all necessary certification requirements, so you don’t have to spend extra time and money on rework.

If you’re looking to source high-quality, reliable SMR parts, or if you have a design in mind and need a custom parts solution, reach out to us to discuss your procurement needs. We’re here to support you at every stage, from prototyping to full-scale production, to help bring your SMR project to life.
Nuclear Power and Nuclear Fusion Equipment Parts References
- U.S. Department of Energy. (2023). Small Modular Reactor (SMR) Technology Overview. Office of Nuclear Energy.
- Nuclear Regulatory Commission. (2022). Design Requirements for Small Modular Reactors. NRC Draft Regulatory Guide.
- International Atomic Energy Agency. (2021). HALEU Requirements for Advanced Small Modular Reactors. IAEA Nuclear Energy Series No. NP-T-2.15.
- World Nuclear Association. (2023). Small Modular Reactors: Key Components and Safety Features. World Nuclear Association Report.
- NuScale Power. (2022). Design Description of the NuScale Small Modular Reactor. NRC Application Document.
- TerraPower. (2021). Natrium Reactor Core and Coolant System Design. TerraPower Technical Report.
Yantai Wanlong Vacuum Metallurgy Co., Ltd.
Yantai Wanlong Vacuum Metallurgy Co., Ltd. is one of the leading manufacturers and suppliers of nuclear power and nuclear fusion equipment parts in China. With a professional production team, our factory is able to offer bulk special copper alloy materials and components with superior quality. Also, customized service is available.
Address: NO.7 ZHONGSHAN ROAD, CHINA(SHANDONG) PILOT FREE TRADE ZONE, YANTAI AREA
E-mail: wlwendy@yt-wlvm.com
WebSite: https://www.ytwlvm.com/