Hey folks, quick question for anyone who’s ever walked through a manufacturing shop floor or browsed a parts catalog: when you hear “injection molded parts,” what’s the first material that pops into your head? Probably plastic, right? Like ABS, PP, maybe nylon—all the rigid, moldable stuff we take for granted in everything from phone cases to car bumpers. But here’s a curveball I get asked at least once a week by new clients: Can injection molded parts be made of silicone? Injection Molded Parts

As a guy who’s owned and run a small injection molded parts supplier for 12 years now, I can tell you this isn’t just a random “can we do this?” question. It’s one that opens up a whole world of applications people don’t even realize exist. Today, let’s break this down like I would when I’m chatting with a buyer at my shop—no stuffy engineering jargon, just straight talk about what’s possible, what works, and why silicone is way more versatile than you might think for injection molding.
First, let’s clear up the most common mix-up: a lot of folks I talk to confuse silicone with the squishy stuff you buy at the craft store for mold making or kitchen baking. That’s room-temperature vulcanized (RTV) silicone, the kind you mix up and leave to set on its own. But that’s not the same as the silicone we use in injection molding. The silicone we work with is liquid silicone rubber (LSR), and it’s a total game-changer for manufacturing. Here’s the deal: LSR is a two-part liquid material—part A and part B—that get mixed in precise ratios right before injection, so it doesn’t start curing until it’s heated inside the mold. That’s key because it lets us use the exact same injection molding machines we already use for plastic parts, just with a few tweaks to the process.
Wait, so why don’t more people know about this? For a long time, a lot of big manufacturers stuck with traditional plastic for injection molded parts, and RTV silicone was the go-to for small, low-volume, custom projects. But lately, LSR injection molding has blown up, and for good reason. Let’s talk about the perks first, because that’s what actually matters for anyone looking for parts.
First up: durability with a soft touch. LSR is inherently flexible, durable, heat-resistant, and even medical-grade compliant (which is a huge deal for things like baby bottle nipples, medical device seals, or even phone grips that you don’t want to slip out of your hand). Unlike plastic, which can get brittle in cold or warp in hot environments, LSR stays flexible from -40°F up to like 500°F—so it works for outdoor parts, kitchen appliances, even aerospace components. And it’s non-toxic, so you don’t have to worry about chemicals leaching out into food or skin contact. For anyone making parts that need to hold up to use and keep people safe, that’s a non-negotiable.
Then there’s the precision. Injection molding for silicone lets you make super tight tolerances—like, down to 0.001 inches tight. That’s way more consistent than RTV silicone, which can have weird shrinkage or thickness inconsistencies when you pour it by hand. For example, take the O-rings that go in car engines or water filters: those need a perfect seal to stop leaks. If you use RTV, you might have a few that are too thick and don’t fit, or too thin and leak. With LSR injection molding, every single O-ring comes out identical, no surprises. That’s why so many automotive and medical companies switched over in the last 10 years.
But hold on, it’s not all rainbows and squishy silicone. Let’s get real about the challenges, because if you’re thinking about making the switch, you need to know the tradeoffs. First, material cost. LSR is way more expensive than most plastics. Like, 2 to 3 times more per pound. That’s a big factor if you’re making high-volume, low-cost parts—you might not want to pay that premium just for a soft touch. Second, mold design. Silicone cures at higher temperatures than plastic, and it’s more prone to sticking to the mold if you don’t have the right coating. So you have to adjust your mold’s surface finish and add release agents, which adds a little time and cost upfront. Also, LSR flows differently than plastic—so if you’re switching an existing plastic part to silicone, you can’t just swap the material and call it a day. You have to rework the mold’s gates, runners, and cooling system to make sure the silicone fills every crevice evenly. I’ve had clients come to me with a part designed for PP plastic, thinking a quick material switch would cut costs, only to find out we have to redesign the mold entirely. That’s a head scratcher for a lot of first-timers, but it’s just part of the process.
Another big one: volume. Injection molding for silicone is awesome for high volume—like 10,000 parts or more—because the machine cycle times are similar to plastic. But if you only need 100 parts, it’s way more cost-effective to use RTV silicone. The setup for LSR injection molding isn’t cheap, so you don’t want to invest in that for a small order. That’s why we tell clients: if you’re making something 500 or less, maybe hold off, but if you’re looking for mass production, LSR is the way to go.
Let’s throw in some real-world examples to make this concrete. A few months back, we worked with a company that makes waterproof smart watches. Their original design used hard plastic for the back cover, but it kept scratching when customers took the watch off, and water would seep in around the edges because the plastic seal was imperfect. We switched them to LSR injection molded back covers—same precision, but soft, scratch-resistant, and the silicone bonds perfectly to the plastic watch body, making the seal 100% leak-proof. They got way fewer warranty claims, and sales went up because people loved that it didn’t irritate their skin (which was a problem with the hard plastic against wrists). Another client: a medical device maker that needs small, sterile seals for insulin pumps. LSR is biocompatible, so it doesn’t react with insulin or body fluids, and the tight tolerances mean no leaks. They used to use custom-machined plastic parts, but switching to LSR injection molding cut their production time in half and dropped their defect rate by 80%.
Now, let’s address a question I get all the time: is it worth it for small business owners or startups? I’ve worked with a ton of startups over the years—guys who have a great product idea but don’t have a huge budget. For them, the key is knowing when to pivot. If their product needs a soft, durable, food-safe or skin-safe part, and they’re planning to scale up production, LSR injection molding is a solid move. But if they’re still in the prototype phase, I tell them to start with 3D printing silicone prototypes to test fit and function, then move to injection molding once they have a stable design. That saves them money upfront, and we can transition to LSR injection molding once they’re ready for mass production.
A lot of people also ask if silicone injection molded parts are as strong as plastic. Short answer: it depends on what you need. LSR is flexible, so it’s not as rigid as ABS or nylon, but it’s way more tear-resistant than you’d think. We have parts that get stretched and twisted thousands of times a day—like the seals on commercial water bottles—and they hold up for years. If you need a rigid part, plastic is better, but if you need flexibility, durability, and safety, silicone is unbeatable.
Another common myth: silicone parts can’t be painted or labeled easily. We solved that a while back by using in-mold labeling (IML) for LSR parts. You can put a label right inside the mold before injecting the silicone, so it’s bonded permanently to the part—no peeling, no scratching. That’s why you see all those silicone phone grips with brand names or logos on them; they don’t just stick a sticker on after, they’re molded right in. For medical parts, we also can add color to the LSR before injection, so every part is the exact color you need, consistent every time.
Now, here’s the thing: I see a lot of articles online that say “no, injection molding can’t be done with silicone,” or “it’s too new, it’s too expensive.” But that’s outdated. LSR injection molding has been around for over 20 years, and the technology has gotten way better. The machines are more precise, the materials are cheaper, and the mold design tools are easier to use. It’s not a niche process anymore—it’s a standard option for a huge range of industries.
If you’re reading this and you’re in the market for injection molded parts, maybe you’ve been considering silicone for a project but weren’t sure if it’s possible, or you were only thinking of plastic. Let me leave you with this: the right material for your part depends on what you’re making. If you need a soft, flexible, non-toxic part that holds up to extreme conditions, silicone injection molding is absolutely worth exploring. It’s not for every project, but it’s for a lot more than people realize.
I’ve seen so many clients come to me with a problem they thought only plastic could solve, and leave with a silicone part that works better, lasts longer, and costs less in the long run. That’s what it’s all about, right? Finding the right material for the job, not just sticking to what you’ve always used.

If you’re curious about whether silicone injection molding is a fit for your next project, don’t overthink it. Shoot me a message to talk through your needs—how many parts do you need? What are they going to be used for? What’s your budget? I’ll give you the straight scoop, no sales pitch, no confusing jargon. I’ve been doing this long enough to know what works, and what doesn’t, and I’m happy to help you figure it out. We don’t do one-size-fits-all around here, and that’s why so many of our clients come back, time and time again.
Injection Molded Parts References:
- International Organization for Standardization. (2020). ISO 10993-5: Biological evaluation of medical devices – Part 5: Tests for in vitro cytotoxicity.
- Society of Plastics Engineers. (2022). Liquid Silicone Rubber: A Guide to Injection Molding for Industrial Applications.
- Techspray. (2021). Mold Release Agents for Liquid Silicone Rubber Injection Molding: Best Practices for Performance and Efficiency.
Yongkang Shunjiang Plastic Products Co., Ltd.
As one of the most professional injection molded parts manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please feel free to wholesale bulk customized injection molded parts from our factory. Also, pricelist is available.
Address: Kangzhuang Road, Xicheng Subdistrict, Yongkang City, Zhejiang Province, China
E-mail: 15158911623@163.com
WebSite: https://www.shunjiangplas.com/