If you’ve ever worked with industrial piping—whether for chemical plants, water treatment facilities, or oil and gas operations—you’ve definitely run into JIS flanges. As someone who’s been in the JIS & KS flanges game for over a decade, I get it: picking the right connection method isn’t just about bolting two pieces of metal together. It’s about preventing leaks, keeping systems safe, and making sure your project stays on track. Today, I’m breaking down the most common JIS flange connection methods, how they work, and when I’d recommend each one—plus why leaning on a reliable supplier (shoutout to us, obviously) makes this whole process way less stressful. JIS & KS Flanges

First, let’s keep it simple: JIS flanges are just flanges that follow the Japanese Industrial Standards set by the Japanese Standards Association. KS flanges are Korean standards, but a lot of their connection rules overlap with JIS, so a lot of the same methods apply across both. The goal of any flange connection is to create a tight, leak-proof seal that can handle pressure, temperature, and whatever corrosive stuff is moving through your pipes. Skip the wrong method, and you’re looking at downtime, messy repairs, or even safety hazards.
Let’s start with the most basic one: slip-on flange connections. This is the workhorse of small to medium pressure applications, like water lines or low-pressure chemical systems. Here’s how it works: you slide a plain end pipe inside the flange’s opening, so the pipe’s end sits inside the flange’s face, then you fillet-weld both the inner and outer edges of the pipe to the flange. Wait, yeah—two welds: one on the inside, one on the outside. That’s what makes this hold. The biggest perk? It’s cheap, easy to fit, and doesn’t require perfect pipe alignment. No fancy machining needed, so it’s great for on-site jobs where you don’t have a ton of time. I use slip-ons all the time for projects like small municipal water upgrades—they’re versatile and reliable when you don’t need super high pressure (usually up to around 150 psi, give or take). The only downside? Those inner welds are hard to inspect after you’re done, so if you’ve got a system that handles toxic gases, you might want something with a more accessible seal.
Next up: socket weld connections. This one’s similar to slip-ons, but instead of sliding the pipe all the way through, you insert the pipe into a socket cut into the flange. The pipe’s end sits just below the flange’s face, then you weld it around the outer edge of the socket. That little gap between the pipe end and the flange face? It’s a tiny space that’s easy to trap dirt or debris, so you’ve got to make sure the area’s clean before welding. Why would you use this? It’s perfect for small diameter pipes (usually 2 inches or less) and low to medium pressure systems, like instrument lines or small process piping. The socket design makes it stiffer than a slip-on, so it handles a bit more pressure without shifting. I’d recommend this for tight spaces too—socket weld flanges are smaller and easier to fit in cramped piping runs than slip-ons. Just remember: no inner weld here, so the only seal is the outer fillet weld. That means inspecting that weld is non-negotiable—miss a bad weld, and you’ve got a leak waiting to happen.
Now, if you need something that’s tight enough for high pressure and high temperature, you’re looking at weld neck flanges. These are the heavy hitters, used in oil refineries, power plants, and other critical systems. A weld neck flange has a long, tapered neck that’s fused to the pipe—no slip-on or socket here, it’s a single piece with the pipe end. You weld the neck to the pipe and then bolt the flange face to a matching flange on the other side. The big win here is the strength: the tapered neck distributes pressure evenly across the flange, so it can handle way more than slip-on or socket weld—we’re talking up to 2,000 psi or higher, depending on the JIS class. And since the weld is on the neck’s outside, it’s super easy to inspect. No hidden inner welds here, so you know exactly what you’re getting. The only catch? Weld neck flanges are more expensive, and they require perfect alignment—you can’t just slide a pipe in willy-nilly. So if your project’s got strict pressure requirements (like a steam line that runs at 500 degrees F), this is the method I push.
Wait, let’s not forget threaded connections. These are the oldest trick in the book, and they’re still around for a reason—small diameter pipes, low pressure, non-critical systems. Instead of welding, you screw the flange onto threaded pipe ends. It’s super easy to install, no welding equipment needed, which is perfect for small jobs like residential plumbing or small air lines. But here’s the thing: threaded connections don’t work for high pressure or large pipes. If you’ve got a 4-inch pipe running at 100 psi, threading is going to be way too weak—you’ll get leaks, or even the pipe will twist loose under pressure. I only recommend threaded flanges for jobs under 2 inches and under 150 psi, and even then, you’ve got to use pipe thread sealant or Teflon tape to make sure the threads don’t leak. Also, corrosion is a problem here—threads can rust over time, so if your system is in a damp or corrosive environment, skip threaded.
Now, let’s talk about a newer method that’s blowing up for both JIS and KS flanges: lap joint connections. This one’s a bit of a hybrid, used when you need easy disassembly. Here’s the deal: you use a lap joint flange and a stub end (a short piece of pipe that’s machined to flare out at the end). You slide the stub end into the lap joint flange, so the flange can rotate around the stub end, then bolt it to another flange. Why rotate? Because if you’re working in a tight space where you can’t line up bolt holes, rotating the lap joint flange lets you align the holes without twisting the whole pipe. That’s a game-changer for on-site jobs where alignment is a pain. Lap joints are also great for systems that need regular disassembly—like processing lines that you clean out every few months. The downside? They’re not as strong as weld necks, so they’re for medium pressure (around 300 psi max). And you’ve got to make sure the stub end is the right size for the flange—cheap mistake there will cause leaks.
Wait, I should mention something that a lot of new folks mix up: the gasket. No matter what connection method you use, the gasket between the two flange faces is what actually stops leaks. For JIS flanges, the gasket material depends on what your system is moving. If it’s water or oil, rubber or neoprene works. If it’s high temp steam, you need a metal gasket (like graphite or stainless steel). And for corrosive chemicals, PTFE gaskets are the way to go. I always tell customers: don’t skimp on the gasket. A $20 gasket mistake can turn into a $2,000 leak repair.
Now, let’s tie this back to being a JIS & KS flanges supplier. I’ve seen so many customers come to me thinking “just give me a flange,” and they end up with the wrong one for their system, leading to headaches. That’s why when you work with a supplier who knows their stuff, we don’t just sell you a part—we walk you through the connection method that fits your project. Last quarter, we had a customer doing a chemical plant upgrade. They initially thought slip-ons would work, but their pressure was 400 psi, so we talked them into weld neck connections instead. Saved them from a potential disaster. Another customer doing a food processing line needed easy disassembly, so we pointed them to lap joints—worked way better than threaded or slip-on.
Here’s the thing: JIS and KS flanges aren’t one-size-fits-all. The connection method you pick depends on pipe size, pressure rating, temperature, how often you need to take the system apart, and even the space you’re working in. Too many people go with the cheapest option, but that’s a false economy—pay a little more upfront for the right connection, and you’ll avoid way more costs (and downtime) later.

If you’re in the middle of a project, aren’t sure which connection method is right for your JIS or KS flanges, or you need reliable, high-quality flanges that meet all the standards, don’t guess. Hit us up to connect and talk through your needs—we’re here to help you pick the right setup that keeps your system safe and running smoothly. No sales pitches, just straight talk from people who’ve been in the game for years.
BW Pipe Fittings References
- Japanese Industrial Standards Committee. JIS B 2220: Steel Flanges. 2018.
- Korean Standards Association. KS B 2220: Steel Flanges. 2020.
- American Society of Mechanical Engineers. B16.5: Pipe Flanges and Flanged Fittings. 2021.
- Industrial Pipe Fitting Association. Guide to Flange Connection Methods. 2022.
Zhejiang Chengjiu Pipeline Co., Ltd.
Zhejiang Chengjiu Pipeline Co., Ltd. is one of the most professional jis flanges manufacturers and suppliers in China, specialized in providing high quality customized service. We warmly welcome you to buy high-grade jis flanges from our factory. For price consultation, contact us.
Address: NO.9-1 Hengsheng Road, Jinchuan Street, Changshan Prefecture, Quzhou, Zhejiang Province, China
E-mail: sale@cncjflange.com
WebSite: https://www.cncjflange.com/